Haier XPB55-12S User Manual - Page 10
Usage, detergent, Using, process, Washing, sequence
View all Haier XPB55-12S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Usage of the detergent Usingprocess How to use the whitener • Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. • Avoid using whitener on laundries with color or pattern as they are prone to lose color. • The whitener shall not touch the laundries directly. • Refer to the users manual for the usage and quantity of the whitener. • For powder whitener, please dissolve it before using. How to use the washing powder • Direct dissolved in the machine: 1.Fill small quantity of water. 2.Add the powder . Run for 30 seconds to dissolve it completely. 3.Put it in the laundries. Select suitable water level. • The instant dissolving of the washing powder: 1.Prepare warm water of 30°C and a container. 2.Add the powder while stirring to fully dissolve it. • The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity. • It is suggested not to use high sudsing detergent. • Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. Selection of the quantity of the washing powder list 1 Laundries quantity Water level (Water quantity) 3.6kg-5.5kg 2.0kg-3.6kg Below2.0kg High (about43L) Medium (about36L) Low (about30L) Standard dosage Concentrated washing powder Common washing powder About 36g About 30g About 25g About 43g About 36g About 30g Selection of the current , water level and washing time list 2 Laundries Current Water level quantity (Water quantity) Laundries Washing time (minutes) 2.4kg-5.5kg Strong Medium (about36L) - High (about43L) Knitwear Cotton,blending,linen Very dirty and thick About3-6 About8-10 About10-13 Bed sheet About7-13 Low (about30L) Below2.4kg Standard - Medium (about36L) Silk(thin laundries) Chemical fiber Cotton,blending,linen About2-4 About3-6 About8-10 8 Washing sequence Using process Water-filling selector handle Overfilling sig Wash timer (To set to below 2 minute, first set to 6 minute then him it back. it can increase the service life of the timer). Wash selector (standard current, strong current) OF 15 6 12 9 L00, WASH TIME WASH SELECTOR Water-filling entrance Buzzer Spin timer (The buzzer will ring when (to set to below 1 minute, the w shing finishes) first set to 2 minute then turn it back. it can increase the service life of the timer). BUZZER SPIN R 5 MAX Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. Page 8 3.Put in the laundries. If the water quantity is insufficient, please add water. WASH SELECTOR Figure 1 STRONG 131 Figure 2 ORAN Page 8 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) -3 Page 8 5.Select the washing time Select the washing time according to the laundries. (Figure 4) Page 8 WASH SELECTO 0,r 91A 3 12 law 6 WASH TIMER 9 mown Figure 3 Figure 4 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR ® Figure 5 9