Haier XPB58-113S User Manual - Page 10

Washing sequence Wash selector (standard current, strong current) Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). STRONG 45 SOAK OFF 3 6 9 STANDARD 12 WASH 15 35 25 WASH TIMER Spin water-filling entrance DRAIN WASH SELECTOR Spin water-filling entrance Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 5 1 4 3 2 SPIN TIMER Wash 1. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1) Run washing program for some time to stir and dissolve the powder completely. Figure 1 STRONG STANDARD 2.Put in the laundries. If the water quantity is DRAIN insufficient, please add water. 3.Select the current. Select the strength of the current according to the laundries. (Figure 2 4.Select the washing time Select the washing time according to the laundries. (Figure 3) Remarks: a. 0~15 minute is the normal soaking. WASH SELECTOR Figure 2 45 SOAK OFF 3 6 9 12 WASH 15 35 25 WASH TIMER Figure 3 b. 15~45 minute is active soaking. During active soaking, the pulsator will run for 2 minutes in each 8 minutes. After the active soaking, it will run normal washing for 15 minutes. C. If you select soaking(i.e. turn the knob to position between STANDARD STRONG 15~45 minutes), be sure to dissolve the washing powder in advance, otherwise the DRAIN washing powder may result in damage to the laundries. WASH SELECTOR 5.After washing, the buzzer will ring. Set the "WASH Figure 4 SELECTOR" at "DRAIN". (Figure4). 8