Haier XQB60-68 User Manual - Page 15

* Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: the time from intermittent running to finishing * When selecting " Twice-wash " program, first soak for about 20 minutes, pre-wash for about 8 minutes, then soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the pre-wash time. 3.Adjust the "water level " knob to select suitable water level Three water levels available according to the laundries quantity: High; Medium; Low. Page 11 After the water inlet as per the preset water level, in case additional water quantity is required, please first set the button to the "Reset", push and hold it to perform automatic water inlet. When it reaches the suitable water level, you can turn it to the needed water level. After the water inlet under set water level, if higher water level is needed, please first turn the knob to " Reset ", then turn back to needed water level. The washing machine will fill water to the new water level. 4 Press the "Start/Pause" button Start Pause 5 Close the top lid If you open the top lid, the machine will stop working before spinning 6 The washing is finished When the washing is finished, the three indicators of "Wash" "Rinse" "Spin" are all on.The power will be switched off automatically about 10 minutes after the finishing of the washing.