Haier XQB60-68 User Manual - Page 6
Installation and adjustment - manual
View all Haier XQB60-68 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure: Back Front Bottom plate Screw Soft items Adjust the installation position The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to confirm if it is horizontal. Adjust the adjustable foot: 1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot. 2.Fasten the nut after adjustment. Adjustable nut Loosen High Fasten Adjustable foot Low Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the inner tub. See to the figure. Install