Hamilton Beach 11550 Use & Care - Page 4

Assembly Instructions - steamer

Page 4 highlights

840188401 ENv02.qxd:Layout 1 11/16/09 2:29 PM Page 4 Assembly Instructions Before First Use: Remove ALL packing materials from garment steamer. 1 Unpack all pieces from carton and remove any packing materials. Assemble steam nozzle holder by pushing it onto the tube end of the retractable pole. NOTE: Brush and Creasing Attachments are optional accessories on select models. 2 Insert base of retractable pole into opening on top of the steamer, lining up the cutout notches; then slide the ridged collar down over the opening. 3 Holding ridged collar on base of pole, turn clockwise until tightened and secure. 4 Assemble steam nozzle holder by pushing it onto the tube end of the retractable pole. To extend the retractable pole, flip each lever on the pole to the open position. 4 5 Extend the pole up to full height; then flip levers closed to secure. 6 7 Firmly grasp base of flexible steam hose Hang steam nozzle/handle on and push in tabs on both sides. Insert steam nozzle holder. into opening on steamer. CAUTION! Burn Hazard: Escaping steam is hot. Ensure base of hose is fully inserted as directed. If steam is leaking around base of hose, turn off and allow to cool before attempting to adjust the base of hose.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

4
Assembly Instructions
1
2
3
Unpack all pieces from carton and remove any packing materials. Assemble
steam nozzle holder by pushing it onto the tube end of the retractable pole.
NOTE:
Brush and Creasing Attachments are optional accessories on select
models.
Insert base of retractable pole into
opening on top of the steamer, lining
up the cutout notches; then slide the
ridged collar down over the opening.
Holding ridged collar on base of
pole, turn clockwise until tightened
and secure.
Assemble steam nozzle holder by
pushing it onto the tube end of the
retractable pole.
To extend the
retractable pole, flip each lever on
the pole to the open position.
4
Before First Use:
Remove ALL packing materials from garment steamer.
7
Firmly grasp base of flexible steam hose
and push in tabs on both sides. Insert
into opening on steamer.
CAUTION!
Burn Hazard: Escaping steam is hot.
Ensure base of hose is fully inserted as
directed. If steam is leaking around base
of hose, turn off and allow to cool before
attempting to adjust the base of hose.
6
Extend the pole up to full height;
then flip levers closed to secure.
5
Hang steam nozzle/handle on
steam nozzle holder.
840188401 ENv02.qxd:Layout 1
11/16/09
2:29 PM
Page 4