Hamilton Beach 14432 Use & Care - Page 9

840178000 ENnv04.qxd:Layout 1 12/2/08 9:42 AM Page 9 Troubleshooting PROBLEM Iron won't heat. PROBABLE CAUSE/SOLUTION • Is iron plugged in and the outlet working? Check outlet by plugging in a lamp. • Has temperature control dial been turned to a fabric setting? • Has auto standby feature activated? Move iron to turn back on. Water is leaking out of the iron. • Do not overfill water tank. • If steam ironing, is adjustable steam switch in the STEAM position, has a temperature been selected, and did iron have enough time to preheat? Allow iron to heat for 2 minutes before using. • If dry ironing, make sure adjustable steam switch is in the NO STEAM position. Iron won't steam. • Check water level. • Has iron had enough time to preheat? Allow iron to heat for 2 minutes before using. • Is adjustable steam switch in the STEAM position? Iron leaves spots on clothing. • ALWAYS empty water tank after using. Water left in tank may discolor clothing and soleplate. Wrinkles not removed. • Choose correct temperature setting for your fabric. See Fabric Setting Chart and Garment Label Symbols. Fabric/clothing scorched. • Select a lower temperature setting. Allow iron to cool for 5 minutes before continuing. Twisted cord. • If cord becomes twisted, turn iron OFF and unplug. Let cool. Empty any water from iron. Hold cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of your iron cord. 9