Hamilton Beach 14565 Use & Care - Page 10

840154803 ENv01.qxd:Layout 1 11/11/10 11:05 AM Page 10 Troubleshooting PROBLEM Iron won't heat. Water is leaking. Iron won't steam. Iron leaves spots on clothing. Wrinkles not removed. Iron too hot. PROBABLE CAUSE • Is iron plugged in and the outlet working? Check outlet by plugging in a lamp. • Is the Temperature Control Dial turned to a fabric setting? • Is the Auto Shutoff Reset Button/Power Light illuminated? If not, push to reset. • Do not overfill the water tank. • If steam ironing, is the Adjustable Steam Control in a steam position that matches the Temperature Control Dial steam range? Did the iron have enough time to preheat? • If dry ironing, make sure the Adjustable Steam Control is in the (Dry Iron) position. • Check water level. • Is the Adjustable Steam Control in the (Steam) position? • Has the iron had enough time to preheat? • ALWAYS empty water tank after using. Water left in tank may discolor clothing and soleplate. • Check Temperature Control Dial is set to correct fabric. • Check Temperature Control Dial and set to lower setting. Let iron cool down 5 minutes before continuing. 10