Hamilton Beach 25332C Use & Care - Page 7

Care and Cleaning - parts

Page 7 highlights

840182300 ENnv02.qxd:Layout 1 7/30/09 10:53 AM Page 7 Care and Cleaning w WARNING Electrical Shock Hazard. Disconnect power before cleaning. Do not immerse cord, plug, or base in any liquid. Burn Hazard. Always use an oven mitt to protect hand during cleaning. NOTE: Do not use metal utensils or abrasive cleansers when cleaning the grill. *Spatula/Scraper is optional accessory on select models. Reflector Pans * 1 Allow grill to cool completely before removing grids and/or drip cup. While holding grid, slide locking tab to release and remove grid. Open grill flat and repeat with other grid. DO NOT REMOVE THE GRID WITH THE GRILL IN AN UPRIGHT POSITION. THE GRILL MUST BE FLAT TO REMOVE GRID. Empty drip cup. 2 If grease drips over the grids into the reflector pans, the reflector pans must also be cleaned. Using a soapy, damp cloth, carefully wipe entire surface of reflector pan to remove all grease. Let dry. 3 Use a clean, damp cloth to wipe clean the outside of grill. DISHWASHER-SAFE Parts may also be washed in hot, soapy water. Rinse; then dry. Do not use steel wool or any type of abrasive cleaner to clean the grill. This will damage the nonstick grilling surface. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

7
Care and Cleaning
Electrical Shock Hazard.
Disconnect power before cleaning. Do not
immerse cord, plug, or base in any liquid.
Burn Hazard.
Always use an oven mitt to protect hand during cleaning.
NOTE:
Do not use metal utensils or abrasive cleansers when cleaning the grill.
*Spatula/Scraper is optional accessory on select models.
w
WARNING
1
DISHWASHER-SAFE
3
Allow grill to cool completely
before removing grids and/or
drip cup. While holding grid,
slide locking tab to release and
remove grid. Open grill flat and
repeat with other grid. DO NOT
REMOVE THE GRID WITH THE
GRILL IN AN UPRIGHT POSITION.
THE GRILL MUST BE FLAT TO
REMOVE GRID. Empty drip cup.
Use a clean, damp cloth to wipe
clean the outside of grill.
Parts may also be washed in hot,
soapy water. Rinse; then dry.
Do not use steel wool or any type
of abrasive cleaner to clean the
grill. This will damage the non-
stick grilling surface.
2
If grease drips over the grids into
the reflector pans, the reflector
pans must also be cleaned. Using
a soapy, damp cloth, carefully
wipe entire surface of reflector
pan to remove all grease. Let dry.
*
Reflector Pans
840182300 ENnv02.qxd:Layout 1
7/30/09
10:53 AM
Page 7