Hamilton Beach 49982 Use and Care Manual - Page 6

How to Program the Hot Water Dispenser 1 2 3 4 Press I/O (ON/OFF) button to turn off hot water dispenser. While holding PROG (program) button on the hot water dispenser side, press H and M on the coffee maker side until the desired start time (AM or PM) is reached. Once desired start time has been reached, release PROG button and current time is displayed. How to Empty the Hot Water Reservoir Unplug and cool completely. The hot water reservoir must be emptied if it is being stored or if it hasn't been used in more than one week. Hold the coffee maker over a sink and pull down on the hot water plug to remove and drain water. After emptied, replace the hot water plug. Press PROG button on the hot water dispenser side to set the water heater to come on automatically at the desired start time. PROG button light will illuminate green when the program has been set. Press PROG button again to cancel program function. NOTES: • You can program both the hot water dispenser and the coffee maker independently. • To see programmed time, press and hold PROG (program) button once. Press again to turn program back on. 6