Hamilton Beach 62697 Use & Care - Page 5

840082200 ENv03 2/20/01 2:00 PM Page 5 3. To remove: Turn mixer off and unplug. Eject beaters or other attachments. 4. Grasp mixing shield in one hand, while holding mixer in other hand. Pull shield straight out, then up, to remove. 5. Wash mixing shield in hot, soapy water. Rinse and dry. Mixer Storage Case Wipe clean with a damp, soapy cloth. To Insert Attachments Flat Beaters, Straight Wire Beaters and Whisk 1. Make sure mixer is unplugged and speed control is set to OFF. 2. Insert a beater or attachment into an opening on the bottom of the mixer. Push until it clicks into place. Repeat with other beater or attachment. Twisted Wire Beaters and Dough Hooks 1. Insert the wire beater or the dough Collar hook with the collar into the opening indi- cated by the illustration on the mixer. 2. Align tabs on the beater or dough Tab Slot hook with the slots in the opening. Push until it clicks into place. Repeat with other beater or dough hook. 5