Hamilton Beach 67608 Use & Care - Page 7

How to Use

Page 7 highlights

840148101 ENv02.qxd 4/14/08 11:12 AM Page 7 How to Use w WARNING Laceration Hazard. Never use fingers to push food down the Feed Chute or to clear the Feed Chute. Always use the Food Pusher provided. 1 Wash fruits and vegetables. NOTE: Most fruits and vegetables such as apples, carrots, and cucumbers will not need to be cut since they will fit into Feed Chute whole. It is recommended that fruits or vegetables, such as oranges, melons, or mangoes, are peeled before placing in unit to minimize impact on juice flavor. 2 Ensure that unit is correctly assembled (see pages 5 and 6) and place a glass or container under spout. 3 Plug cord into 120 volt AC outlet. Turn ON/OFF Switch to ON. 4 5 Juice will flow into glass and separated pulp will accumulate in Pulp Container. NOTE: Pulp Container can be emptied during juicing by turning juice extractor OFF and then carefully removing Pulp Container. (Replace empty Pulp Container before continuing to juice.) With the motor running, place food down the Feed Chute. Using Food Pusher, gently guide food down Feed Chute. To extract the maximum amount of juice, always push Food Pusher down slowly. 6 To minimize clean-up, place a plastic grocery bag in Pulp Container to collect pulp. When juicing is completed, simply remove grocery bag containing pulp. NOTE: Do not allow Pulp Container to overfill as this may prevent correct operation or damage the unit. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

7
How to Use
Wash fruits and vegetables.
NOTE:
Most fruits and vegetables
such as apples, carrots, and cucumbers will
not need to be cut since they will fit into
Feed Chute whole. It is recommended that
fruits or vegetables, such as oranges, mel-
ons, or mangoes, are peeled before placing
in unit to minimize impact on juice flavor.
1
Ensure that unit is correctly
assembled (see pages 5 and 6)
and place a glass or container under
spout.
2
Plug cord into 120 volt AC outlet.
Turn ON/OFF Switch to ON.
3
With the motor running, place food
down
the Feed Chute.
Using Food Pusher, gen-
tly guide food down Feed Chute.
To
extract the maximum amount of juice,
always push Food Pusher down slowly.
4
Laceration Hazard.
Never use fingers to push food down the Feed Chute or to clear
the Feed Chute. Always use the Food Pusher provided.
w
WARNING
Juice will flow into glass and
separated pulp will accumulate
in Pulp Container.
NOTE:
Pulp Container can be emptied
during juicing by turning juice extractor
OFF and then carefully removing Pulp
Container. (Replace empty Pulp
Container before continuing to juice.)
To minimize clean-up, place a plastic
grocery bag in Pulp Container to collect
pulp. When juicing is completed, simply
remove grocery bag containing pulp.
NOTE: Do not allow Pulp Container to
overfill as this may prevent correct
operation or damage the unit.
5
6
840148101 ENv02.qxd
4/14/08
11:12 AM
Page 7