Hamilton Beach 94950 Operation Manual - Page 5

Mixing a Drink wWARNING Operating the Mixer wWARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Place the ingredients to be mixed into an appropriate container. See the "Mixing Containers" section on the previous page. 2. Set the speed control for the desired mixing speed. NOTE: You will have to develop the speed and time required to obtain the desired results with various mixes. 3. Set the power switch to the ON position. NOTE: The agitator MUST always be on before it comes in contact with the ingredients. 4. Slowly insert the container up into the mixer until the agitator comes in contact with the ingredients. Move the container up and down for thorough mixing. The splash shield will move up and down when it comes in contact with your hand or wrist. 5. When the mixing is complete, slowly lower and remove the container from the mixer and set the power switch to OFF. NOTE: Agitator is subject to wear and tear during normal usage. Inspect agitator daily. Replace agitator every 90 days. Cut Hazard Always use collar with paper cup when operating. Always use shield when mixing. Do not put spoon or other utensils in cup when mixing. Failure to follow these instructions can result in broken bones or cuts. Use collar with paper cup 5