Harbor Freight Tools 61317 User Manual - Page 4

SAFETy SETUp Specifications Electrical Rating Tank Capacity 120VAC / 60Hz / 8.3A 5 Gallon 3179371 Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the appliance off and unplug the appliance from its electrical outlet before performing any procedure in this section. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly 1. Open the Upper Clasps located on each side of the Tank. See Figure A. Upper clasp 5. Secure the Caster Supports to the Tank Base, using one Screw for each Caster Support. See Figure B. Screw Figure A 2. Lift and remove the Upper Cover from the Vacuum/ Blower. Then, turn the Tank upside down. 3. Press the Casters firmly into the Caster Supports. 4. Insert each of the Caster Supports into the slots located at the bottom of the Tank Base. Press firmly until the Caster Supports snap into place. caster Support Figure B 6. Turn the Tank right side up so that it rests upon its four Casters. 7. Remove any stored parts from the Tank before use. OpERATION MAINTENANcE Page 4 For technical questions, please call 1-800-444-3353. Item 61317