Harbor Freight Tools 61729 User Manual - Page 4
Operation
View all Harbor Freight Tools 61729 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SAFETy SETUp Operation Read the ENTIRE RULES FOR SAFE OpERATION section at the beginning of this manual including all text under subheadings therein before set up or use of this blower. Note: The Speed control is located on the side of the handle. 1. Make sure the blower's Speed Control is in the ″OFF″ position. 2. Plug the Power Cord into a GFCI-protected outlet. 6. Additional powered devices can be plugged into the 120V~ outlets on the sides of the blower. Do not exceed 13A combined current draw across the two outlets. 7. To prevent accidents, turn off the blower and unplug it after use. Clean, then store the blower indoors out of children's reach. 3. Position the blower as desired. It can rest on different Pads to direct the airflow at different angles. It must rest on a level, firm base. Air Outlet Handle 120VAc Outlet 4. Leave adequate space around the blower for unimpeded air flow. Air flows in at the sides of the blower. Do not allow dirt or debris to be drawn into the blower. 5. Rotate the Speed Control to the desired speed setting. To turn the blower OFF, rotate the blower's Speed Control to the ″OFF″ position. Note: If blower suddenly stops operating, the Overload Protection may have tripped. Make sure that the blower is dry, that the vents are not obstructed, and that the blower has cooled completely before pressing the Reset Button on the side of the handle and continuing to use the blower. Feet Air Inlet Figure A: Blower components OpERATION MAINTENANcE Page 4 For technical questions, please call 1-888-866-5797. Item 61729