Harbor Freight Tools 61729 User Manual - Page 5
If blower suddenly stops operating
View all Harbor Freight Tools 61729 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SAFETy SETUp User Servicing Instructions procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION OR ELEcTRIc SHOcK: Turn the power Switch of the blower off, unplug the blower from its electrical outlet, and allow the blower to cool completely before performing any inspection, maintenance, or cleaning procedures. TO pREVENT SERIOUS INJURy FROM BLOWER FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1. BEFORE EAcH USE, inspect the general condition of the blower. Check for: • loose hardware, • misalignment or binding of moving parts, • cracked or broken parts, • damaged electrical wiring, and • any other condition that may affect its safe operation. 2. Clean outside housing regularly. Use damp cloth during cleaning and dry before use. Do not open housing for cleaning or any other reason. 3. WARNING! If the supply cord of this blower is damaged, it must be replaced only by a qualified service technician. If blower suddenly stops operating The Overload Protection may have tripped. Before pressing the Reset Button and continuing to use the blower, make sure: • that the blower is dry, • that the vents are not obstructed, and • that the blower has cooled completely. OpERATION MAINTENANcE Item 61729 For technical questions, please call 1-888-866-5797. Page 5