Harbor Freight Tools 62533 User Manual - Page 2
Specifications, Important Safety Information, Installation Instructions
View all Harbor Freight Tools 62533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Specifications Installation Instructions Run Time Length Battery up to 8 hours 22' 1x 'AA' NiMH Important Safety Information 1. Verify that installation surface has no hidden utility lines before drilling, driving screws, or digging to insert stake. 2. Place/mount the LED Rope to prevent tripping or choking. Keep out of reach of young children and babies. 3. Install only according to these instructions. Improper installation can create hazards. 4. Wear ANSI-approved safety goggles and heavy-duty work gloves during installation. 5. Keep installation area clean and well lit. 6. Keep bystanders out of the area during installation. 7. Do not install when tired or when under the influence of drugs or medication. 8. This product is not a toy. Do not allow children to play with or near this item. 9. Use as intended only. 10. BATTERY MUST BE DISPOSED OF PROPERLY. Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Selecting a Location 1. Select a mounting location that will receive full sunlight as many hours in the day as possible. 2. Even partial shade will greatly hinder charging and therefore limit operation time. 3. If the area has strong nighttime light sources, these may prevent the light from turning on at night, or may cause it to flicker instead of turning on completely. Wall Mounting 1. Select a wall location without hidden cables or utility lines. Turn off all power in the wall for added safety. 2. Place the Wall Base in the desired location and mark through the mounting holes. 3. Set the Wall Base aside and drill holes in the marked locations appropriate for the Anchors. 4. Insert the Anchors into the holes, align the holes in the Base with the Anchors, and secure it in place with the Screws. 5. Attach the Panel Connector to the Wall Base. 6. Attach the Solar Panel to the slots on the Panel Connector. Stake Mounting 1. Select a ground location to insert the Stake. 2. Make sure that there are no hidden obstacles or utility lines in the area. Page 2 For technical questions, please call 1-888-866-5797. Item 68353