Harbor Freight Tools 62533 User Manual - Page 3
Operation Instructions, Battery Replacement
View all Harbor Freight Tools 62533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3. If the ground is too hard to insert the stake, dig a hole large enough for the stake, refill the hole, and slightly pack the ground to give some support. 4. Insert the Stake into the hole. 5. Attach the Stake Connector onto the top of the Stake. 6. Attach the Panel Connector to the top of the Stake Connector. 7. Attach the Solar Panel to the slots on the Panel Connector. LED Rope Mounting 1. The LED Rope can be left loose, or can be mounted to an object. 2. Place/mount the LED Rope to prevent tripping or choking. Keep out of reach of young children and babies. 3. If wall mounting, select a location without hidden cables or utility lines. Also, turn off all power in the wall for safety. 4. Drill holes for the Rope Anchors in the desired locations. All 8 Rope Clips should be used to reduce the length of loose sections. 5. Place the LED Rope through the Rope Clips. 6. Insert the Rope Anchors into the holes, align the holes in the Clips with the Anchors, and secure in place with the Rope Screws. Operation Instructions 1. For best results, allow light to charge with switch in off position for at least 1 day before switching on. 2. Turn the switch underneath Solar Panel to ON. 3. Light will turn on at dusk and turn off at dawn. Battery Replacement 1. Turn the switch underneath Solar Panel to OFF. 2. Remove the screws under the Solar Panel. 3. Open the Solar Panel. Remove the old battery and recycle or dispose of it properly. 4. BATTERY MUST BE DISPOSED OF PROPERLY. 5. Install a new battery of same size and type in the Solar Panel. 6. Close the Solar Panel and secure with the screws. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 68353 For technical questions, please call 1-888-866-5797. Page 3