Harbor Freight Tools 67696 User Manual - Page 3

GENERAL SAFETY RULES Additional safety protection will be required in WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. some environments. For example, the working area may include exposure to a noise level which can lead to hearing damage. The employer and user must ensure that any necessary hearing protection is provided and used by the operator and others in the work SAVE THESE INSTRUCTIONS area. Some environments will require the use of head protection equipment. When required, the employer WORK AREA and user must ensure that head protection marked to comply with ANSI Z89.1 is used. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Floor must not be slippery from wax or dust. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence Do not operate power tools in explosive atmo- of drugs, alcohol, or medication. A moment of spheres, such as in the presence of flammable inattention while operating power tools may result in liquids, gases, or dust. Power tools create sparks serious personal injury. which may ignite the dust or fumes. Dress properly. Do not wear loose clothing or Keep bystanders, children, and visitors away while jewelry. Contain long hair. Keep your hair, clothing, operating tools. Distractions can cause you to lose and gloves away from moving parts. Loose clothes, control. jewelry, or long hair can be caught in moving parts. Operate air compressor in an open area at least 18 Do not overreach. Keep proper footing and balance in. away from any wall or object that could restrict at all times. Proper footing and balance enables better the flow of fresh air to ventilation openings. control of the tool in unexpected situations. ELECTRICAL SAFETY Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations. electric shock. Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. When operating a power tool outside, use an WARNING: The cord of this product contains lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock. TOOL USE AND CARE Do not exceed the pressure rating of any PERSONAL SAFETY component in the system. Eye protection which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should Protect material lines and air lines from damage or puncture. Keep hose and power cord away from sharp objects, chemical spills, oil, solvents, and wet floors. ALWAYS be worn by the operator and others in the Check hoses for weak or worn condition before work area when loading, operating, or servicing each use, making certain all connections are this tool. Eye protection is required to guard against secure. Do not use if defect is found. Purchase a flying fasteners and debris, which could cause severe new hose or notify an authorized service center for eye injury. examination or repair. The employer and/or user must ensure that proper Release all pressures within the system slowly. eye protection is worn. We recommend a Wide Vision Dust and debris may be harmful. Safety Mask for use over eyeglasses or standard safety Store idle tools out of the reach of children and glasses that provide protection against flying particles other untrained persons. Tools are dangerous in the both from the front and side. Always use eye protection hands of untrained users. which is marked to comply with ANSI Z87.1. 3