Harbor Freight Tools 68147 User Manual - Page 11
Safety, Operation, Maintenance, Setup
View all Harbor Freight Tools 68147 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Safety Setup Mounting Chisels with a Collar 1. Pull the Lock Lever open about 70-80° to the second engaging position, as shown in Figure F. 2 Retaining Ring 3 1 Figure F 2. Insert the collared Chisel. 3. Slide the Chisel in as far as it will go. Figure G 4. Return the Lock Lever to its original position to lock the Chisel in place. See Figure H. Figure H 5. Physically check that the Chisel is secure before operating. The Chisel will have approximately 1-3/4" of play, but should not come out when pulled. Operation Maintenance Item 68147 For technical questions, please call 1-888-866-5797. Page 11
Page 11
For technical questions, please call 1-888-866-5797.
Item 68147
SAFETY
OPERATION
MAINTENANCE
SETUP
Mounting Chisels with a Collar
1.
Pull the Lock Lever open about 70-80° to the
second engaging position, as shown in Figure F.
Figure F
2.
Insert the collared Chisel.
3.
Slide the Chisel in as far as it will go.
1
2
Retaining
Ring
3
Figure G
4.
Return the Lock Lever to its original position
to lock the Chisel in place. See Figure H.
Figure H
5.
Physically check that the Chisel is secure before
operating.
The Chisel will have approximately 1-3/4”
of play, but should not come out when pulled.