Harbor Freight Tools 69303 User Manual - Page 3

Specifications Electrical Rating Inlet / Outlet Diameter Maximum Flow Maximum Suction Lift Maximum Delivery Height Start Pressure Stop Pressure Power Cord Length 120V~ / 60Hz / 10 A 1 IN. NPT 976 GPH 26 FT. 150 FT. 22 PSI 65 PSI 6 FT. Installation Note: Do not install the pump by suspending it unsupported from its power cord or discharge hose. The pump must be suspended from the handle. Remove Shipping Plug before installation. Installing 1. Thread the Pressure Control Box onto the water outlet on the top of the Pump. 2. Set the Pump horizontally on a level, solid and dry foundation. 3. Secure the Pump to the mounting surface by installing bolts (not included) through the mounting holes in the base plate. 4. The Pump is supplied with 1" NPT connections to be fitted in the suction and discharge ports. See Figure 1. 5. If the Pump is installed with long pipes (as shown), the pipes must be properly supported on either side of the Pump to prevent straining the connections. If the Pump is drawing water from a well, fit a foot valve (not included) to the end of the suction pipe. WARNING! Do not allow the Pump to get wet. Note: The maximum delivery height of the Pump is 32 feet. Item 69303 For technical questions, please call 1-800-444-3353. Page 3