Harbor Freight Tools 94282 User Manual - Page 6

SAFETy SETUp Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Vacuum Operation TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the Switch off and unplug the power cord from its electrical outlet before removing the power Head. 1. Open the Latch Assemblies located on each side of the Tank. See Figure A. Then lift and remove the Power Head from the Vacuum Blower. Dust Bag Suction port 2. Insert the Foam Filter (10) over the Filter Basket. See Figure C. Filter Basket Sponge Filter Figure c Note: The Dust Bag (8) and the Cloth Filter (15) are used only for dry vacuuming. 3. For wet vacuuming: If present, remove the Dust Bag and/or the Cloth Filter. 3b. Dry vacuuming setup: Note: The Dry Filter can be used alone or with the Dust Bag. a. To install the Dust Bag (8), slide its opening over the portion of the Suction Port (4) protruding from within the Tank of the Vacuum Blower. See Figure D. Figure D b. Slide the Cloth Filter over the Foam Filter. See Figure E. cloth Bag Figure E 4. Re-attach the Upper Cover to the Vacuum Blower. 5. Insert the larger end of the Hose (13) securely into the Vacuum Port. 6. If desired, slide a Nozzle onto the Hose. OpERATION MAINTENANcE Page 6 For technical questions, please call 1-800-444-3353. Item 94282