Harbor Freight Tools 98452 User Manual - Page 12
This Unit Can Power The Following Items
View all Harbor Freight Tools 98452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
GENERATOR SUPPORT AND MOUNTING Mount the Generator on a concrete slab capable of supporting the weight of the Generator. The slab must extend on all sides beyond the Frame (41B) by a least one foot. Contact a cement contractor for slab specifications if necessary. Attach the Frame to the concrete slab using 3/8" diameter expansion anchor bolts (not supplied). GROUNDING THE GENERATOR Note: It is recommended that only a trained and licensed electrician perform this procedure. Connect a #6 AWG grounding wire (not included) from the Grounding Connector (8) on the Generator to a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately ground the Generator. (See Figure B.) THIS UNIT CAN POWER THE FOLLOWING ITEMS ITEM 1/3 HP Air Compressor Belt Sander Drum Mixer Motor 1/2 HP Reciprocating Saw Microwave Oven Refrigerator/Freezer Sump Pump 1/2 HP Vacuum Cleaner Well Pump 1/2 HP RUNNING START-UP WATTS WATTS 720 1000 1200 2400 700 1200 875 2300 750 1400 1000 1200 700 2200 1050 2150 1100 2200 1000 2100 NOTE: Wattages listed above are estimates for that type of equipment only. Check nameplate wattages on all loads before connecting to Generator. SKU 98452 For technical questions, please call 1-800-444-3353. Page 12