Harbor Freight Tools 98452 User Manual - Page 15

For technical questions, please call 1-800-444-3353., unleaded, See C., To Start The Engine,

Get Harbor Freight Tools 98452 - 2400 Peak/2200 Running Watts PDF manuals and user guides View all Harbor Freight Tools 98452 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

3. Before the first use, remove the Fuel Tank Cap (33B1) and fill the Fuel Tank (30B1) with unleaded gasoline. Then, replace the Fuel Tank Cap. If necessary, refill the Fuel Tank with unleaded gasoline. (See Figure C.) To Start The Engine: 1. Make sure the electrical powered tools/equipment that will be used is not plugged in to the Generator. 2. Turn the 115 volt AC Circuit Breaker (5) to its "ON" position. (See Figure D.) 3. Open the Fuel Valve (40B). (See Figure E.) 4. Move the Choke Lever (116C) to the CLOSED position to start a cold engine. Leave the Choke Lever (116C) in the open position to restart a warm engine. (See Figure E.) SKU 98452 For technical questions, please call 1-800-444-3353. REV 09a Page 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
Page 15
SKU 98452
For technical questions, please call 1-800-444-3353.
Before the first use, remove the Fuel Tank Cap (33B
3.
1
) and fill the Fuel Tank (30B
1
)
with
unleaded
gasoline.
Then, replace the Fuel Tank Cap.
If necessary, refill the
Fuel Tank with unleaded gasoline.
(See Figure C.)
To Start The Engine:
Make sure the electrical powered tools/equipment that will be used is not plugged
1.
in to the Generator.
Turn the 115 volt AC Circuit Breaker (5) to its “
2.
ON
” position.
(See Figure D.)
Open the Fuel Valve (40B).
3.
(See Figure E.)
Move the Choke Lever (116C) to the CLOSED position to start a cold engine.
4.
Leave the Choke Lever (116C) in the open position to restart a warm engine.
(See Figure E.)
REV 09a