Harman Kardon CH140 Owners Manual - Page 12

CLOCK 1 . Turn this unit on by pushing the VOLUME control knob. 2. Press the EJECT button to change the DISPLAY mode from TUNER to CLOCK. 3. Press and hold the MEMORY button. 4. To set the correct Hour, press TUNING UP while still pressing the MEMORY button. Each press of the TUNING UP button will advance the clock one hour. If the button is pressed and held, the hours will advance rapidly. 5. To set the minutes, press the TUNING DOWN button while still pressing the MEMORY button. Each press of the button will advance the clock one minute. If the button is pressed and held the minutes will advance rapidly. 6. When the MEMORY button is released the clock will begin counting. NOTE : In the TUNER mode, the display can be changed to CLOCK for 8 seconds by pressing the EJECT button. In the TUNER mode, the display can be changed to CLOCK by pressing the EJECT button while pressing the MEMORY button. By pressing the EJECT button in CLOCK mode, frequency is displayed for 8 seconds. CASSETTE 1 . With the cassette tape opening to the right, insert the cassette into the loading slot as far as it wil l go. The unit is then turned ON even if the tuner is off, and the tape will begin playing. 2. If the tape is a Metal/CrO2 type cassette, push the 70µSEC (Tape Selector) switch. "70µS" indicator i l luminates. 3. Push the DOLBY NR switch for a tape recorded with Dolby NR. DD B indicator illuminates. 4. Adjust the VOLUME, BASS, TREBLE, BALANCE and FADER controls to suit your listening preference. 5. To stop tape play, depress the EJECT button. The cassette will eject and the player wil l automatically change over to the Tuner mode (when the tuner is switched on). 6. The cassette wil l be ejected automatically when the tape reaches the end during play or F.F. mode. NOTE : Cassette will be ejected automatically whenever you turn the ignition switch to the "OFF" position while a cassette is playing. 11