Harman Kardon CITATION B Owners Manual - Page 9
Citation, Diagram, Speaker, Resistor
View all Harman Kardon CITATION B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CONNECTING THE SPEAKERS FOR MONOPHONIC OPERATION If the Citation B is to be used monophonically and stereo is to be added at a later date, it is essential that both speaker output terminals are terminated into a proper load. Refer to Diagram B for proper installation of the loading resistor. AT NO TIME SHOULD THE OUTPUT TERMINALS BE PARALLELED FOR MONOPHONIC OPERATION. CITATION B SPE AKER CH A14/ .1 e. 16 OHM 20 WATT RESISTOR DUAL BANANA BANANA SPADE LUG SPEAKSot RED BLK DIAGRAM B - MONO - I SPEAKER Ei 16 OHM 20 WATT RESISTOR 4, 8 OR 16 OHM SPEAKER 0 H90720168A This is the only correct method for connecting a single monophonic speaker to the Citation B. CONNECTING THE PREAMPLIFIER Standard patch cords with RCA phono plugs at each end should be used to connect your monophonic or stereophonic preamplifier to the Citation B. Connect one patch cord from the left (Channel A) output of your preamplifier to the CHANNEL A input of your Citation B. Connect an additional patch cord from the right (Channel B) output of your preamplifier to the CHANNEL 13 input of your amplifier. WARNING: DO NOT REMOVE OR MANIPULATE THE INPUT CONNECTIONS WHILE YOUR AMPLIFIER IS ON. THIS MAY RESULT IN DAMAGE TO YOUR AMPLIFIER OR YOUR SPEAKERS. 8