Harman Kardon DC5500 Owners Manual - Page 12
Advanced, Operations
View all Harman Kardon DC5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ADVANCED OPERATIONS Operating the Unit as a Dual Cassette Deck Operating the unit as a dual cassette deck allows continuous play between two different cassette tapes. It also allows copying between tapes at "real time" or high speed. Continuous Play 1. With a pre-recorded tape in each transport, press the Pri/Sec Transport Selector button to select the Primary Transport as current. 2. Press Direction Mode until both CONT and CD are illuminated in the Display. 3. Select the correct type of Dolby Noise Reduction. For the DC5700 only, the NR type for the Primary Transport may be set independently from the Secondary Transport. Use the Pri/Sec Transport selector button to enable independent settings. 4. Press (Forward Play) to begin Continuous Play with the front side of the tape in the Primary Transport. The unit will play both sides of the tape in the Primary Transport, followed by both sides of the tape in the Secondary Transport. 5. Press 4 (Reverse Play) to begin Continuous Play with the rear side of the tape in the Primary Transport. The unit will play the rear side of the tape in the Primary Transport, followed by both sides of the tape in the Secondary Transport, and then the front side of the tape in the Primary Transport. 6. To play more than two tapes continuously, you may exchange the tape that is not playing. NOTE: Continuous Play will keep the unit playing until each side of each tape is played eight times. Continuous Record (DC5700 only.) 1. With a tape in each transport, press the Pri/Sec Transport Selector button to select the Primary Transport as current. 2. Press Direction Mode until :) is illuminated in the Display. 3. Select the correct type of Dolby Noise Reduction in either PRI or SEC mode. The NR type for the Primary Transport must be set independently from the Secondary Transport. 4. Press Rec/Pause to place the unit in Record Pause mode. 5. Press (Forward Play) to begin Continuous Record on the front side of the tape in the Primary Transport. The unit will record both sides of the tape in the Primary Transport, followed by both sides of the tape in the Secondary Transport. 6. Press 4 (Reverse Play) to begin Continuous Record on the rear side of the tape in the Primary Transport. The unit will record the rear side of the tape in the Primary Transport, followed by both sides of the tape in the Secondary Transport. NOTE: Continuous Record automatically stops when the rear side of the tape in the secondary transport is recorded. Using Sync Reverse When making "real time" or high speed copies, you may want to use the Sync Reverse mode. Simply press the Sync Reverse button after choosing Copy or Hi Speed Copy. In Sync Reverse, when the leader at the end of the recorded tape is detected, the Secondary Transport goes into Play Pause, while the Primary Transport goes into Record Mute mode. At the point the blank tape reaches its leader, the direction of both Transports is reversed and recording continues. 11