Harman Kardon DMC 1000 Owners Manual - Page 12

MESSAGE DISPLAY Source Playback Indicators Mode Network Camera Angle Random Parental Lock Repeat Time Message Area Video Output Resolution Title Video Track/Chapter Audio Off NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. Playback Mode: These indicators light to show the current playback mode: › Lights when content is playing in the Normal mode. › › Lights in the Fast Search Forward and Slow Play modes, with the speed shown briefly in an on-screen banner. ± Lights when the disc is paused. ‹ ‹ Lights when the disc is in the Fast Search Reverse mode, with the speed shown briefly in an on-screen banner. NOTE: Slow Play is not available for MP3 files. Sources: One of these indicators will light to indicate the current media source (DMC [the Media Library], DVD, VCD, USB 1 [front], USB 2 [back], Card 1 [SD, MMC, Memory Stick, xD-Picture Card], Card 2 [CF], The Bridge, AUX). During a recording, the source indicator will light. Video Output Resolution: Either the 480i or 480p indicator will light to indicate whether the Component Video Outputs are in progressive scan mode. When the Composite or S-Video Outputs are in use, this indicator will always indicate the default 480i (interlaced scan) setting, even if you attempt to change the Output Resolution setting in the Video Setup menu to a higher video resolution. When the HDMI Output is in use, its video resolution will be indicated. NOTE: The 480i resolution is not available via the HDMI Output. If the HDMI Output is connected simultaneously with the Composite or S-Video Output, this indicator will reflect the HDMI Output's resolution, and the signal at the Composite and S-Video Outputs will remain at 480i. Network: This indicator lights when the RJ45 jack is connected to a live network. 12