Harman Kardon FL 8380 Owners Manual - Page 14
Programmed-Play Operation
View all Harman Kardon FL 8380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Programmed-Play Operation The FL 8380's advanced programming capability enables you to preset the order in which tracks play, repeat specific discs or tracks, repeat all discs and tracks, and/or repeat any portion of a specific disc. Programmed Play Programmed play allows you to program up to 32 tracks into the FL 8380's memory. To begin programming the FL 8380, press the Program button j on the remote control. The PROGRAM indicator will light in the Information Display #. You may now begin to enter the discs and tracks in the order in which you wish to have them play. Once the PROGRAM indicator is lit, P-01 will appear in the Information Display, replacing the track time. This indicates that you are about to program the first track. Press the Disc Select button @ a to choose the first disc to be programmed, and note that AL will flash in the Information Display. To have all tracks on the disc play in order as the first program step, press the Program button j. To select a single track on the disc, press the Numeric buttons b corresponding to the desired track. You may also use the Skip buttons 8 e to select a track. When the disc and track are selected, press the Program button j. Note that the program-step indication on the right side of the Information Display will change to P-02. You may now select another disc and/or track for the next program step, following the instruction shown above. When the program step is selected, press the Program button j. Repeat this procedure for each program step until you have completed the desired programming. Press the Stop button 9f to complete a program sequence, or press Play g (Play/Pause ) on the front panel) to begin immediate play of a program sequence. If the maximum of 32 program steps is reached, the program-step indication at the right side of the Information Display will go out, and the disc and track that have been programmed as the first program step will be shown. Once a program list has been entered, press the Play button g (Play/Pause ) on the front panel) to begin listening to the sequence. After the entire program has been played, the FL 8380 will stop. As long as the Stop button 9f has not been pressed and the PROGRAM indicator remains lit, you may repeat the programmed-play sequence again by pressing the Play button g (Play/Pause ) on the front panel). Pressing the Stop button 9f twice, opening the disc drawer by pressing the Open/Close button 6, or turning the FL 8380 off will erase the program information from the unit's memory. Checking Program Contents To check the contents of a program while the unit is stopped, press the Skip buttons 8e and the Information Display # will step through each of the programmed discs and tracks. Clearing Programs To clear a single track from the program list, press the Program button j on the remote until the track to be deleted from the program sequence appears in the Information Display #. When the track number appears, press the Clear button c on the remote once. Press the Program button j to select other items to be deleted, or the Stop button 9f to end the deletion process. When the unit is stopped, but the PROGRAM indicator is still lit, you may clear the entire contents of a program by pressing the Clear button c on the remote. Repeat Play The FL 8380's programming system enables you to repeat all of the tracks on all of the discs, a complete single disc, or a single track. Repeat Track Play To repeat a single track, press the Repeat button m on the remote control while the desired track is playing so that the REPEAT and 1 indicators are lit. The desired track may also be selected using the Disc Select buttons @a and then the Skip buttons 8e. When the track is chosen, press the Repeat button m on the remote control and the Play button g (Play/Pause ) on the front panel). The track will play until the Stop button 9f is pressed. Repeat Disc Play To repeat an entire disc, press the Repeat button m twice so that the REPEAT, 1 and DISC indicators are lit. Press the Disc Select buttons @a until the desired disc's icon lights and the disc number appears in the Information Display #. Press the Play button g (Play/Pause ) on the front panel) to begin the playback sequence. The selected disc will play through to the end and then continue to repeat until the Stop button 9f is pressed. Repeat All Discs To repeat all of the discs that have been loaded into the FL 8380, press the Repeat button m three times so that the REPEAT, ALL and DISC indicators are lit. Press the Play button g, (Play/Pause ) on the front panel) and the unit will play all tracks on all discs, starting with the disc that has been loaded in the play position. When all discs have played through, the sequence will repeat and the discs will continue to play until the Stop button 9f is pressed. NOTE: You may cancel a repeat function any time by pressing the Repeat button m until the REPEAT indicators go out. The player will continue with normal play and then stop when the current disc is finished playing. 13 PROGRAMMED-PLAY OPERATION