Harman Kardon FL 8380 Owners Manual - Page 9

Remote Control Functions a Disc-Select Buttons: Press one of these buttons to select the disc in a specific position in the CD drawer. b Numeric Buttons: Press these buttons to select a specific track on a disc. The FL 8380 will immediately go to the track and begin to play it. These buttons are also used to enter track numbers into the memory for preprogrammed-play lists. (See page 13 for complete information on programming the FL 8380.) c Clear Button: Press this button to remove tracks from a programmed sequence. Each press of the button will remove one track, starting with the last track programmed to play. (See page 13 for complete information on programming the FL 8380.) d Search Buttons: Press these buttons to search forward - or backwards , through a disc to locate a particular portion of the selection being played. e Skip Buttons: Press one of these buttons to move to the next track -Í or to move back to the previous track Í, on the disc being played. f Stop Button: Press this button to stop the disc currently being played. g Play Button: Press this button to start the playback of a CD. If the CD drawer is open, pressing this button will automatically close the drawer. h Random Button: Press this button to play all of the tracks on a disc in a random order. (See page 11 for more information.) i Pause Button: Press this button once to momentarily pause a disc. When the button is pressed again, the disc will resume play from the point at which it was paused. j Program Button: This button is used to program the playback of a disc in a particular order. (See page 13 for complete instructions on programming the FL 8380.) k Time Button: In normal operation, the display will show the running time of the track being played. Press the button once to check the time remaining for the track in play. Press the button again to view the total play time remaining for the disc in play. l Intro Button: Press this button to put the FL 8380 into the Intro Scan mode. When you press this button, the unit will play the first 10 seconds of each track on the disc, and then move to the next track. Press the button again to defeat the function and continue full play of the current track. (See page 12 for more information.) m Repeat Button: Press this button once to continuously repeat the track currently being played. Press it a second time to repeat the entire disc. (See page 13 for more information.) n Disc Skip Buttons: Press these buttons to change to the next disc. If a disc position is empty, the FL 8380 will automatically search for the next position that contains a disc. o Power On Button: When the FL 8380 is plugged into an active AC outlet, press this button to turn the unit on. The Status Mode Indicator 2 will turn green. If the unit is plugged into a switched outlet, power must be applied to the switched outlet in order for the Power On button o to be effective. p Power Off Button: Press this button to turn the unit off; the Status Mode Indicator 2 will turn amber, indicating that the unit is in a Standby mode. 8 REMOTE CONTROL FUNCTIONS