Harman Kardon HK230A Owners Manual - Page 12
Noise, Service, Custom, Installation, >>>
View all Harman Kardon HK230A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HUM AND NOISE In any high fidelity installation, hum may be caused by the interconnection of a record player, tuner and amplifier, as a result of the cables and different grounds. If hum is experienced with your receiver, disconnect everything but the speakers from the receiver. If hum persists, reverse the AC line cord. Plug in the record player and if hum appears, reverse the record player power plug and connect a single lead from the record player chassis to the ground post on the rear of the receiver chassis. Connect your other devices in this manner. CAUTION: Hum may also be induced by defective connecting cables or by running these cables too close to a strong AC field. SERVICE MOUNTING SHELF If this instrument should not perform properly during the first two (2) years after date of purchase, contact the factory for instructions. The factory has many authorized warranty service stations in the United States. To aid us in selecting a service station convenient to you, it would be helpful if you would indicate which major city is closest to your home. Please write our Customer Service Department, Harman-Kardon, Incorporated, Plainview, New York 11803. Be sure to include the model and serial number of the unit. A brief description of your other components is often of help in answering your questions. DO NOT return this instrument to Harman-Kardon without first receiving authorization. 1?>>)> CUSTOM INSTALLATION 1. Locate and drill four 1/4 " diameter holes in mounting shelf. 2. Position and cut out front panel opening. Bottom of opening should be flush with top of mounting shelf. 3. Remove four rubber feet from unit. Rubber feet and screws are no longer used for cabinet installation. 4. Remove the two screws and washers from top of metal enclosure. 5. Install unit from front through panel cutout opening. 6. Fasten unit to mounting shelf. If Y2 " thick mounting shelf is used fasten with four No. 6 X 3/4 " long self-tapping screws and washers. If 3/4 " shelf is used fasten with four No. 6 X 1" long self-tapping screws and washers. 7. Dimensions shown for front panel opening are critical. For best results, the opening should be made slightly undersized and filed to fit. 11 33 5 64 14 13 16 (REF UNIT) 11 1 32 -1 4 DIA (4 RE QD) . 3 32 9 (REF 16 UNIT) • 11