Harman Kardon HK3250 Owners Manual - Page 10

Recalling The Preset, Stations, Scanning The Preset, Stations In Sequence, Recording With A, - remote control

Page 10 highlights

HK3250 engelsk 11/01/98 14:28 Side 8 ENGLISH RECALLING THE PRESET STATIONS Select the channel number of the desired preset station with the UP or DOWN TUNE/PRESET or NUMERIC buttons on the remote control unit. SCANNING THE PRESET STATIONS IN SEQUENCE 1 Press the PRESET SCAN button on the remote control unit to listen to the preset stations. 2 The receiver will start scanning the stations in the preset sequence and each station is received for 4 seconds. 3 At the desired station, press again to stop scanning. NOTES: • If the end of the frequency range is reached during the auto or manual tuning, tuning will continue from the opposite end. • When FM stereo broadcasts are poor, select the FM mono mode with the SEEK/STEREO button so that the AUTO indicator goes out. • When memorizing a new station, the previously memorized station on the same channel number is cleared. • In the event of a power failure or when the receiver is disconnected from the AC outlet, the memorized stations are maintained for approximately 2 weeks. RECORDING WITH A CASSETTE DECK 1 Select the program source to be recorded with the INPUT FUNCTION SELECTOR buttons. 2 Start recording on the cassette deck. 3 Play back the desired program source. • The volume, balance, bass and treble settings have no effect on the recording or dubbing. • When recording is performed on a 3-head cassette deck, the recorded sound can be monitored through the speakers by pressing the TAPE MONITOR button to ON. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

RECALLING THE PRESET
STATIONS
Select the channel number of the
desired preset station with the UP or
DOWN TUNE/PRESET or NUMERIC
buttons on the remote control unit.
SCANNING THE PRESET
STATIONS IN SEQUENCE
1
Press the PRESET SCAN button
on the remote control unit to listen
to the preset stations.
2
The receiver will start scanning the
stations in the preset sequence
and each station is received for 4
seconds.
3
At the desired station, press again
to stop scanning.
NOTES:
If the end of the frequency range is
reached during the auto or manual
tuning, tuning will continue from the
opposite end.
When FM stereo broadcasts are
poor, select the FM mono mode
with the SEEK/STEREO button so
that the AUTO indicator goes out.
When memorizing a new station,
the previously memorized station
on the same channel number is
cleared.
In the event of a power failure or
when the receiver is disconnected
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.
RECORDING WITH A
CASSETTE DECK
1
Select the program source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
2
Start recording on the cassette
deck.
3
Play back the desired program
source.
•The volume, balance, bass and
treble settings have no effect on
the recording or dubbing.
•When recording is performed on
a 3-head cassette deck, the
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
8
ENGLISH
HK3250 engelsk
11/01/98 14:28
Side 8