Harman Kardon HKTS 12 Owners Manual - Page 8

Mounting Options

Page 8 highlights

MOUNTING OPTIONS Satellites and Surrounds The satellite speakers may be placed on a shelf. They may be tilted upward simply by tilting them back onto their sculpted surfaces. They may be wall-mounted using the supplied brackets. Wall-Mounting Attach bracket to wall. If possible, position the speakers so that the mounting screws used connect directly to a wooden wall stud. If that is not possible, use optional wall anchors that are rated to support at least twenty-five pounds. The customer is responsible for proper selection and use of mounting hardware, available through hardware stores, to properly and safely wall-mount the speakers. Center Speaker 8 MOUNTING OPTIONS Insert knob into bracket as shown, then place speaker on bracket and secure it from below using the supplied screw. With the longest side down, insert the support cradle's pegs fully into either the front or rear pair of holes on the bottom of the center speaker. The front holes will tilt the speaker slightly downward toward the listener, while the rear holes will hold the speaker straight.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

8
MOUNTING OPTIONS
MOUNTING OPTIONS
They may be wall-mounted using the
supplied brackets.
Satellites and Surrounds
Insert knob into bracket as shown, then
place speaker on bracket and secure it
from below using the supplied screw.
Wall-Mounting
Center Speaker
Attach bracket to wall. If possible, position
the speakers so that the mounting screws
used connect directly to a wooden wall
stud. If that is not possible, use optional
wall anchors that are rated to support at
least twenty-five pounds.
The customer is responsible for proper
selection and use of mounting hardware,
available through hardware stores, to prop-
erly and safely wall-mount the speakers.
The satellite speakers may be placed on a
shelf. They may be tilted upward simply by
tilting them back onto their sculpted surfaces.
With the longest side down, insert the
support cradle’s pegs fully into either the
front or rear pair of holes on the bottom
of the center speaker. The front holes will
tilt the speaker slightly downward toward
the listener, while the rear holes will hold
the speaker straight.