Harman Kardon HKTS 2 MkII Owners Manual - Page 9
Front, Right
 |
View all Harman Kardon HKTS 2 MkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Speaker Connections Use this installation method if your receiver/ processor has a dedicated LFE subwoofer output. Use the line-level input jack marked "SUB" for the Low-Frequency Effects channel. Connect this jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier. Make sure that you have configured your surround-sound processor for "Subwoofer On." The left and right speakers should all be set to "Small." Front Left - + SUB-TS Subwoofer LINE LEVEL IN SUB R L Front Right - + Front L e f t SUB/LFE O u t Receiver Front Right SPEAKER CONNECTIONS 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
 |
 |
SPEAKER CONNECTIONS
9
Use this installation method if your receiver/
processor has a dedicated LFE subwoofer out-
put.
Use the line-level input jack marked "SUB" for
the Low-Frequency Effects channel. Connect this
jack to the LFE output or subwoofer output
on your receiver or amplifier. Connect each
speaker to the corresponding speaker terminals
on your receiver or amplifier.
Make sure that you have configured your
surround-sound processor for “Subwoofer On.”
The left and right
speakers should all be set to
“Small.”
Speaker Connections
LINE LEVEL IN
L
R
SUB
SUB/LFE
Out
SUB-TS Subwoofer
Receiver
Front
Left
Front
Right
Front
Right
Front
Left
–
+
–
+