Harman Kardon SOUNDSTICKS3AM Owners Manual - Page 4
Troubleshooting - power cable
View all Harman Kardon SOUNDSTICKS3AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SOUNDSTICKS® III Specifications* System Frequency range: 44Hz - 20kHz Power consumption: 4W idle, 65W maximum Subwoofer Transducer (1): 6" woofer Amplifier output power: 20W RMS Dimensions (W x H): 9-3/16" x 10-3/16" (232mm x 258mm) Weight: 4 lb (2.2kg) Satellite Transducers (4): 1" full-range per channel Amplifier output power: 10W RMS per channel Dimensions (W x H): 2" x 10" (51mm x 254mm) Weight: 1.5 lb (0.7kg) Step 1. Place individual SoundSticks® III (satellites) beside monitor/ computer. R L R L Step 2. Place subwoofer as desired, but placement under your desk will provide optimal performance. Step 3. Connect satellite cables to the dual subwoofer cable. Also connect the input cable to the subwoofer input cable jack. Step 4. Insert SoundSticks III input cable into the computer or other audio device. Troubleshooting Symptom No sound from SoundSticks III speaker system. Possible problem No power to subwoofer. Power adapter plug not inserted correctly. No volume or low volume. *These specifications are subject to change without notice. Solution Ensure power supply is connected to live power source and is properly connected to subwoofer. Please note: When subwoofer is powered, a power LED should light. Place plug with arrow symbol facing UP into the subwoofer. Touch the volume "Up" (+) pad on the volume control satellite to unmute and/or increase the system volume level. Note: Touching the volume "Down" (-) pad lowers the system volume. Touching both (+) and (-) volume control pads at the same time will mute the system. 4