Harman Kardon SOUNDSTICKSII Owners Manual - Page 13
Step 5., Step 6., Step 7., Step 8., Step 9., Symptom, Possible problem, Solution - harmankardon
![]() |
View all Harman Kardon SOUNDSTICKSII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step 5. Plug power cord into power adapter. Step 6. Plug power Step 7. Plug power cord Step 8. Push power adapter into subwoofer. into wall receptacle. ON/OFF button. Unit is on when LED is lit. Step 9. Adjust volume level by touching + or - button. Touching both the + and - buttons mutes the audio. When muted, touching either button unmutes the audio. Symptom No sound from subwoofer, only satellites. No sound from satellites, only subwoofer. High frequencies sound dull. Possible problem Subwoofer volume control set at minimum. Satellites not connected to subwoofer. Satellites not positioned properly. www.harmankardon.com Solution Rotate subwoofer volume control clockwise until relative volume level is appropriate. Check connection of satellites to subwoofer. Position and tilt (angle) loudspeakers toward listener. The sound from the satellites is very directional due to the 4-element linear array design. This product is intended to be supplied by a listed direct plug-in power unit marked "Class 2" and output rated 16V DC minimum 1.5 A. 13
![](/manual_guide/products/harman-kardon-soundsticksii-owners-manual-d09e88e/13.png)