Harman Kardon T30C Owners Manual - Page 6
Adjusting, Tonearm
View all Harman Kardon T30C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Adjusting the Tracking Force and the Anti-skating Device 1 . Set the ANTI-SKATING control to "0" position, and move the TONEARM away from the ARMREST. 2. Adjust the COUNTERWEIGHT until the TONEARM is horizontal. Be sure to remove the stylus guard when adjusting the COUNTERWEIGHT. • Rear of Tonearm too Heavy 9 ADJUSTING THE TONEARM 3. Turn the stylus TRACKING FORCE SCALE RING until the "0" mark is opposite the indication mark. Be careful not to disturb the zero balance of the COUNTERWEIGHT when making this adjustment. 4. Now set the recommended cartridge stylus tracking force by turning the COUNTERWEIGHT to the required figure on the scale ring. 5. Finally, set the ANTI-SKATING control so that it indicates the same tracking force as selected for the cartridge stylus. When you turn the counterweight, the tracking force scale ring wili turn with it Turn the counterweight in the direction of the arrow, moving it forward. •Headshell too Heavy Turn the counterweight in the direction shown, moving it toward the rear. • In Balance 0 Set the tracking force to the indication mark. Set the anti-skating control normally to the same as the tracking force setting. Set the anti-skating control to the indication mark. Caution: While you are adjusting the zero balance, hold the TONEARM gently to prevent the stylus from coming into contact with anything. 5