Harman Kardon T30C Owners Manual - Page 8
Adjusting, Speed, Control, Operating
View all Harman Kardon T30C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ADJUSTING THE SPEED CONTROL OPERATING This unit is provided with a fine speed control that can be precisely adjusted as follows. 1. Place the STROBOSCOPE DISC provided with the turntable on the PLATTER st MAT. 2. Place the SPEED SELEC- TOR in the 33 or 45 posi tion in accordance with disc speed. 3. Bring the TONEARM over the PLATTER MAT with the CUE lever lifted, and the PLATTER will automatically begin to rotate. Then observe the striped markings on the STROBO- SCOPE DISC under fluorescent light. 4. Adjust the SPEED CON- TROL until there is no ap- • ;;I't"C.1.") - parent movement of the ):It(c markings. Turn the SPEED CONTROL to the left and the marks will move to the left, turn it to the right and they will move to the right. 1. Turn down the volume of your receiver to the minimum position. 2. Turn on your receiver and select the phono function according to the owner's manual of the receiver. 3. Place the disc on the PLATTER MAT. If this is a 45 RPM disc, you will need to use the center hole ADAPTOR provided with the turntable. 4. Set the SPEED SELECTOR to the 33 or 45 position. 5. Flip the CUE lever up to lift the TONEARM, then bring the TONEARM over the disc and the PLATTER will begin to rotate. Then flip the CUE fever . : down and the TON FARM will be lowered and the record will begin to play. 6. Slowly raise the volume of receiver up to your desired listening level. 7. If you wish to stop a record from playing before its end is reached, press the CUT button. The TONEARM will automatically lift and return to the ARMREST. The PLATTER will stop turning and power will be switched off. 8. At the end of the disc, the TONEARM will automatically lift and return to the ARMREST. The PLATTER will stop turning and power will be switched off. 7