Hayward HCF7030C HCF Series Cartridge Filter Operation Manual ISC7031HCF - Page 5

GENERAL INFORMATION 2. General Information Your Hayward HCF cartridge filter combines superior water filtration with ease of operation and totally corrosion-resistant construction. With filtration ratings to 9000 gallons (34,000 liters) per hour, they are designed for continuous or intermittent operation, for installation above or below the pool water line, for fresh or salt water swimming pools or spas. HCF filters utilize multiple reusable, reinforced polyester filter cartridge elements to provide a high degree of water clarity and long filter cycles with minimum care. HCF7030C A IN CM 52.5 133 REQUIRED CLEARANCE "F" SIDE "B" ABOVE IN CM IN CM 18 46 28 71 2.1 Installation WARNING Manual Air B Relief Valve (MAR) 26 " 66 CM This product should be installed and serviced only by a qualified pool professional. UPPER FILTER BODY 1. The filter system should be installed on a level concrete slab or other rigid base. Select a well drained and vented area, one that does not flood when it rains. Position the filter so that the piping connections, and winter drain are convenient and accessible for operation, service, maintenance and winterizing. A 2. Position filter body such that all operation and safety labels are visible. CLAMP FROM THE PUMP (INLET) 5" 3. Position filter so the filter will drain by gravity. DRAIN PLUG 4. If practical, place pump and filter in the shade to shield it from continuous, direct heat from the sun. F TO THE POOL (OUTLET) 12.5" LOWER FILTER BODY 5. Connect the pool suction plumbing from the skimmers and pool suction outlets at the pump inlet port. 6. Connect the pump discharge (pump OUTLET) to the top port of the filter (filter INLET). 7. Connect the bottom filter port (filter OUTLET) to the pool return plumbing lines. 8. Do not locate pump controls over or near filter. 9. Verify water discharge from the manual air relief valve(MAR) is directed away from electrical devices. 5