Hayward High Flow High Flow Suction Outlet Manual - Page 4
Installation Instructions, Parts Lists
View all Hayward High Flow manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Page 4 of 8 DUAL SUBMERGED SUCTION OUTLET ISSQUAREHF REV C INSTALLATION INSTRUCTIONS: - Use a #2 Philips head Screwdriver. NOTICE: When installing WG1032PAK2 or WG1033PAK2 refer to ASME A112.19.8b-2009 for the proper instructions on how to construct the field-fabricated sump. See Illustration on Page 7 PARTS LISTS 3 4 2 3 WG1032HFPAK2 12" x 12" Frame and Cover Dual Pack Item Description Qty 1 1 Cover 2 2 Inner Frame 2 (Installed) 3 Machine Screw #10-24 8 4 #13-9 Self Taping Screw 8 (Installed) 5 Outer Frame 2 WGX1032BHF 12" x 12" Spare Part Cover and Inner Frame Item Description Qty 1 Cover 1 2 Inner Frame 1 3 Machine Screw #10-24 4 5 4 #13-9 Self Taping Screw 4 4 Warning - Suction Entrapment Hazard. Suction in suction outlets and/or suction outlet covers which are installed in a small area and/or below the surrounding surface can cause severe injury or death due to body entrapment hazard. ·To reduce the risk of body entrapment, installation of the field fabricated sumps must be such that the top of the mounted cover is a minimum of 1 13/16" above the finished pool surface over an area larger than 40" on a diagonal. When replacing a SP1032B grate with a replacement cover WGX1032BHF, in an existing SP1032A Outer Frame (One that does not have inner frame installed), the grate is removed and discarded. Locate the Inner Frame (Item 2) and using four (4) screw #13-9 x 5/8" (Item 4) Secure Inner Frame to Outer Frame. Should you not be able to secure the Inner Frame to the Outer Frame using the existing holes in the Outer Frame; drill four.149" (#25) diameter holes in the Outer Frame, using the holes in the Inner Frame to locate the holes to drill in the Outer Frame. Using four (4) screw #13-9 x 5/8" (Item 4) Secure Inner Frame to Outer Frame utilizing the four (4) new holes. Locate the Cover (Item 1) and using four (4) #10-24 x 15/16" long screws (Item 3) Secure to the Inner Frame. When replacing a WG1032B or a WG1032BHF cover, Do NOT remove the Inner Frame from the Square Frame unless it is damaged. The four screws in the corners of the cover are retained in the cover. New screws should be used whenever the cover is replaced. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS INCLUDING SCREWS.