HealthRider H130t Treadmill English Manual - Page 17

HOW TO USE A WEIGHT LOSS WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2. Enter your weight. Press the weight increase and decrease buttons located below the distance display. When your weight is displayed, press the Start button. Your weight will be saved in memory. Note: Always enter your weight before using a weight loss workout. 3. Select a weight loss workout. To select one of the six weight loss workouts, press the Weight Loss button repeatedly until the name of the desired workout appears in the matrix. When a weight loss workout is selected, the Incline display will show the maximum incline setting of the workout and the Speed display will show the maximum speed setting. The Time display will show how long the workout will last. After a few seconds, the matrix will show the profile of the workout. 4. Start the walking belt. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking. height of the flashing segment indicates the Current Segment speed setting for the cur- rent segment. At the end of each segment, a se- ries of tones will sound and the next segment of the profile will begin to flash. If a different speed or incline setting is programmed for the next segment, the speed or incline setting will flash in the display to alert you. The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed and Incline buttons. Note: When the current segment of the workout ends, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To restart the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for that segment. 5. Follow your progress with the matrix and the displays. See step 5 on pages 14 and 15. Each workout is divided into one-minute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for consecutive segments. During the workout, the profile will show your progress. The flashing segment of the profile represents the current segment of the workout. The 6. Measure your heart rate if desired. See step 6 on page 15. 7. When you are finished exercising, remove the key from the console. See step 7 on page 15. 17