HealthRider H130t Treadmill English Manual - Page 6
Assembly
View all HealthRider H130t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex key and your own Phillips screwdriver mallet , and adjustable wrench . , rubber Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly. 3/8" Star Washer (8)-8 #8 x 2 1/4" Screw (7)-4 #8 x 3/4" Screw (6)-6 #8 x 1" Tek Screw (1)-4 5/16" Star Washer (9)-4 3/8" Nut (11)-2 Extension Leg Nut (10)-4 5/16" x 2" Bolt (2)-4 3/8" x 2 3/4" Bolt (5)-2 3/8" x 1" Bolt (4)-6 3/8" x 1 3/4" Bolt (3)-2 1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (55) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. Attach two Base Pads (81) to the Base (85) with two #8 x 1" Tek Screws (1). 55 85 81 1 81 1 6