HealthRider H130t Instruction Manual - Page 15

16. Note: If assembled on a smooth surface, the treadmill may roll forward during this step. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 18 is completed. Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (D) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with two 5/16" x 3/4" Screws (25) and two 5/16" Star Washers (11). 16 11 25 56 Bracket 38 D Bracket 11 25 17. Orient the Storage Latch (53) so that the decals are facing away from the treadmill as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with an M8 x 42mm Bolt (6) and an M8 Nut (12). Raise the Storage Latch (53) to a vertical position. If a tie (E) and a spacer (F) are in the top of the latch, remove and discard them. 17 Decals E F 53 12 94 6 15