HealthRider H150t Treadmill User Manual - Page 12

Orient the Pulse Crossbar 81 as shown. Attach

Get HealthRider H150t Treadmill PDF manuals and user guides View all HealthRider H150t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

10. Identify the Left and Right Trays (95, 96). Attach the Left and Right Trays (95, 96) to the Console Base (98) with eight #8 x 1/2" Screws (1). Tip: It may be easier to start the two inside Screws and then slide the Trays into place before tightening the other six Screws. Note: It may be necessary to rotate the Console Frame (101) upward when attaching the Left and Right Trays (95, 96). 10 1 96 1 101 1 98 95 1 1 11. IMPORTANT: To avoid damaging the Pulse Crossbar (81), do not use power tools and do 11 not overtighten the #10 x 3/4" Screws (4). Orient the Pulse Crossbar (81) as shown. Attach the Pulse Crossbar to the Handrails (79) with four #10 x 3/4" Screws (4) and four #10 Star Washers (5). Start all four Screws, and then tighten them.  Make sure that the Upright Wire (91) is not pinched. Firmly tighten the four 5/16" x 2 3/4" Screws (12). 81 91 4 5 79 12 4 79 5 12 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
12
98
96
95
101
1
1
10
10. Identify the Left and Right Trays (95, 96).
Attach the Left and Right Trays (95, 96) to the
Console Base (98) with eight #8 x 1/2" Screws
(1).
Tip: It may be easier to start the two
inside Screws and then slide the Trays into
place before tightening the other six Screws.
Note: It may be necessary to rotate the Console
Frame (101) upward when attaching the Left and
Right Trays (95, 96).
1
1
1
11.
IMPORTANT: To avoid damaging the Pulse
Crossbar (81), do not use power tools and do
not overtighten the #10 x 3/4" Screws (4).
Orient the Pulse Crossbar (81) as shown. Attach
the Pulse Crossbar to the Handrails (79) with
four #10 x 3/4" Screws (4) and four #10 Star
Washers (5).
Start all four Screws, and then
tighten them.
Make sure that the Upright Wire (91) is not
pinched.
Firmly tighten the four 5/16" x 2 3/4"
Screws (12).
11
4
4
5
5
12
12
79
81
79
91