HealthRider H200t Instruction Manual - Page 11

Screws 4 and the six #8 x 3/4 Screws 2., Remove and save the four 5/16 x 3/4

Get HealthRider H200t PDF manuals and user guides View all HealthRider H200t manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

8. Insert the Upright Wire (81) into the bottom of the right handrail assembly (D) and out of the 8 front as shown. Attach the right handrail assembly (D) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); do not fully tighten the Screws yet. Make sure not to pinch the Upright Wire (81). Then, remove and discard the indicated screw (C). 28 11 D C 81 90 9. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. If 9 there are ties securing the Pulse Crossbar (93) to the Console Base, remove the ties. 4 2 18 64 2 Remove and discard the four indicated screws 2 (E). Then, remove the Pulse Crossbar (93). R emove and save the four 5/16" x 3/4" Screws (4) and the six #8 x 3/4" Screws (2). Then, lift out the two Console Clamps (41) and the Console Frame (18). E 41 4 Tie 93 2 Tie 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
11
8.
Insert the Upright Wire (81) into the bottom of
the right handrail assembly (D) and out of the
front as shown.
Attach the right handrail assembly (D) to the
Right Upright (90) with two 5/16" x 2 1/2" Screws
(28) and two 5/16" Star Washers (11);
do not
fully tighten the Screws yet. Make sure not to
pinch the Upright Wire (81).
Then, remove and discard the indicated screw
(C).
28
11
D
90
81
8
64
18
41
93
E
9
9.
Set the Console Base (64) face down on a soft
surface to avoid scratching the Console Base. If
there are ties securing the Pulse Crossbar (93)
to the Console Base, remove the ties.
Remove and discard the four indicated screws
(E). Then, remove the Pulse Crossbar (93).
Remove and save the four 5/16" x 3/4"
Screws (4) and the six #8 x 3/4" Screws (2).
Then, lift out the two Console Clamps (41) and
the Console Frame (18).
4
4
2
2
2
2
Tie
Tie
C