HealthRider H40x Pro Bike English Manual - Page 11
included with the heart rate monitor.
View all HealthRider H40x Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
If you purchase the optional heart rate monitor (see page 18), follow the step below to install the receiver included with the heart rate monitor. 15. See step 11 on page 9 and remove the Console 16 (75) from the Console Bracket (78). Remove the three screws from the back cover (A) of the Console (75), and then remove the back cover. Connect the wire on the receiver (B) to the wire in the Console (75). Hold the receiver so that the antenna is oriented as shown and is facing upward. Remove the paper from the adhesive pad on the back of the receiver (B). Press the receiver onto the console in the indicated location. Then, reattach the back cover (A). Reattach the Console (75) to the Console Bracket (78). Note: Discard any other wires that are included with the heart rate monitor. B Antenna Wires A 75 Attach receiver here 11