HealthRider H40x Pro Bike English Manual - Page 8
Attach the Water Bottle Holder 74 to the Frame
![]() |
View all HealthRider H40x Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Orient the Seat (22) and the Seat Carriage (3) as 7 shown. Attach the Seat (22) to the Seat Carriage (3) with two M8 Hex Nuts (71). Make sure that the nose of the Seat is pointing straight ahead before you tighten the Hex Nuts. 22 2 Locate the Adjustment Knob (23) on the Seat Post (2). Loosen the Adjustment Knob and pull it outward. Then, insert the Seat Carriage (3) into the Seat Post. 23 Slide the Seat Carriage (3) to the desired position, release the Adjustment Knob (23) into one of the adjustment holes in the Seat Carriage, and then tighten the Adjustment Knob. Make sure that the Adjustment Knob is firmly engaged in an adjustment hole. 71 3 8. Attach the Water Bottle Holder (74) to the Frame 8 (1) with two M5 x 12mm Screws (63) and two M5 Washers (60). 74 1 60 63 8
![](/manual_guide/products/healthrider-h40x-pro-bike-english-manual-816cf07/8.png)