HealthRider H550i Treadmill English Manual - Page 16
How To Use A Custom Program
View all HealthRider H550i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
HOW TO USE A CUSTOM PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. 2 Select one of the custom programs. To select a custom program, press Custom & Heart Rate Control Programs button repeatedly; "P-11" or "P-12" will appear in the priority display for a few seconds. In addition, the maximum incline setting of the program and the maximum speed setting of the program will flash in the display for a few seconds. A profile of the speed settings of the program will scroll across the matrix. A few seconds after a custom program is selected, the display will show how long the program will last. Note: If only three columns of indicators scroll across the matrix, see HOW TO CREATE A CUSTOM PROGRAM on page 15. 3 Press the Start button or the Speed increase button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings that you programmed previously. Hold the handrails and begin walking. Each custom program is divided into several one-minute segments. Current Segment One speed setting and one incline setting are programmed for each segment. (The same speed setting and/or incline setting may be programmed for two or more consecutive seg- ments.) The speed setting for the first segment will be shown in the flashing Current Segment column of the matrix. (The incline settings are not shown in the matrix.) The speed settings for the next four segments are shown in the columns to the right. When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash, a series of tones will sound, and the speed setting and the incline setting will flash in the display. When the first segment ends, all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column, and the treadmill will automatically adjust to the second speed and incline settings that you programmed previously. The program will continue in this way until the speed setting for the last segment is shown in the Current Segment column and the last segment ends. The walking belt will then slow to a stop. If desired, you can redefine to the program while using it. To change the speed or incline setting for the current segment, simply press the Speed or Incline buttons. When the current segment ends, the new setting will be saved in memory. To increase the length of the program, first wait until the program is completed. Then, press the Start button and program speed and incline settings for as many additional segments as desired. When you have added as many segments as desired, press the Stop button twice. To decrease the length of the program, press the Stop button twice at any time before the program is completed. To stop the program at any time, press the Stop button. To restart the program, press the Start button or the Speed increase button. 4 Follow your progress with the display. See step 5 on page 12. 5 Measure your heart rate if desired. See step 6 on page 13. 6 Turn on the fans if desired. See step 7 on page 13. 7 When you are finished exercising, remove the key from the console. See step 7 on page 15. 16