HealthRider H55t Treadmill English Manual - Page 10
If You Do Not Connect The Con
View all HealthRider H55t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Insert the upper end of the Left Handrail (71) into the tube on the Console Frame (87). Hold the 7 lower end against the Left Upright (75). Attach the Left Handrail (71) with two 1/4" x 1 3/4" Screws (10), two 1/4" Star Washers (11), and two 1/4" x 5/8" Screws (9) as shown; do not tighten the Screws yet. Attach the Right Handrail (not shown) as described above. 71 87 75 9 11 10 8. Locate the tie in the console assembly. Use the tie to pull the ground wires out of the hole in the console assembly. With the help of a second person, hold the console assembly near the Left Upright (75). Connect the Upright Wire (70) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire (70). Connect the ground wires and remove the tie. 8 Tie Ground Wires Console Assembly Console Wire 70 Console Wire 70 Wire Tie 75 10