HealthRider H55t Treadmill English Manual - Page 11

9. Insert the ground wires into the console assembly as you set the console assembly on the Left Upright (75) and the Right Upright (not shown). Make sure that no wires are pinched. Attach the console assembly with eight #8 x 3/4" Screws (6) (four are shown); start all eight Screws, and then tighten them. Do not overtighten the Screws. Insert the wires into the Left Upright (75). Fully tighten the ten Screws (7, 9, and 10) (only one side is shown). See step 4. Fully tighten the six 3/8" x 3 1/2" Screws (4). 9 Ground Wires 6 9 Console Assembly 6 75 Wires 7 10 10. A ttach the Pulse Bar Bottom (90) to the console assembly with six #8 x 3/4" Screws (6); start all six Screws, and then tighten them. Do not overtighten the Screws. 10 Console Assembly 90 6 6 6 11