HealthRider H80t Treadmill English Manual - Page 11
Start all four Screws, and, then tighten them.
View all HealthRider H80t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Set the console assembly face down on a soft surface to avoid scratching the console assem- 9 bly. Remove the two screws (D). Next, lift off the Pulse Bar Bottom (87). Discard the two screws. D Console Assembly 10. Slide the Pulse Bar Bottom (87) assembly onto the left and right handrail assemblies (B, C). 10 Attach the Pulse Bar Bottom (87) with four #10 x 3/4" Screws (9). Start all four Screws, and then tighten them. 87 B9 D 87 C 9 11
11
10.
Slide the Pulse Bar Bottom (87) assembly onto
the left and right handrail assemblies (B, C).
Attach the Pulse Bar Bottom (87) with four #10
x 3/4" Screws (9).
Start all four Screws, and
then tighten them.
10
9
9
87
B
C
9.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the two screws (D). Next, lift off the
Pulse Bar Bottom (87). Discard the two screws.
9
D
D
87
Console
Assembly